Welcome Nanjing Jim Sensing Technology Co., the company's official website!

Chinese English Contact Us Collection site Online Message

Hotline 18951916712025-86200765

Hot keyword search: Magnetostrictive transducer|TEMPOSONICS| BALLUFF Displacement sensor

Contact Us

Mob:18951916712

Nanjing Jim Sensing Technology Co。 Ltd。

Contacts:Manager Zhu

Tel:025-86200765

E-mail:leo@card24k.com

Online QQ:3895478

Address: Nanjing wiscom Park 8 Building

How does the magnetoelastic displacement sensor work?

Author:Nanjing Jim Sensing Technology Co。 Ltd。Website:www.card24k.com/Popularity:Publication time:2017-09-26 14:58

  The working principle of magnetostrictive displacement sensor:

  When the starting pulse is transmitted in the waveguide wire, a rotating magnetic field along the direction of the waveguide wire is generated along with the start pulse of the electronic circuit in the electronic storehouse,

  When the magnetic field and magnetic field durability meet or float during the occurrence of the magnetostrictive effect, the waveguide wire twist, this is a twist in the electronic equipment cabin pickup can arrange the perception and converted into the corresponding current pulse,

  By calculating the time difference between two pulses, the measured displacement and liquid level can be accurately measured

  Advantages and disadvantages of magnetostrictive displacement sensor

  Now, in the displacement measurement, encoder must take up a large part of the shopping mall, but the encoder must also have defects, such as simple damage, short service life, interrupted by the power supply interruption, resulting in some occasions are not applicable

  The output of SSI magnetostrictive displacement sensor has the following benefits: 1) the standard RS485/RS422 digital output signal, SSI synchronous serial data output to the same format and must output encoder output gray code or binary code,

  It can be easily used as an alternative to the encoder as a displacement measurement. Both interfaces are compatible and can be completely replaced. 2) the reliability of the magnetostrictive displacement sensor is excellent, and the SSI signal has very high anti-interference performance,

  Can communicate with remote transmission, data synchronization method, used in a variety of closed-loop control system, convenient and various controller or PLC connection, and the equipment is simple, the use of long life, will greatly reduce the encoder than repair workload.

  3) output orientation is a certain value, flash controller can be read at any time, without interruption of power supply, and then switch on, do not need to start from scratch。 The encoder must be punctual calibration, power to zero from scratch, and so on

  The SSI output magnetostrictive displacement sensor compensates for these defects of the intended encoder

上一篇:没有了 下一篇:General classification of displacement sensors

Key word:How,does,the,magnetoelastic,di

Home |About us |Products |Technical |News |Contacts US |Online Message
  • BALLUFF Displacement sensor
热购彩票开户 微购彩票投注 苹果彩票开奖走势 苹果彩票登陆 9号彩票 热购彩票充值 9号彩票充值中心 热购彩票 热购彩票 微购彩票官网